Product Specifications

SleevSaver is manufactured to the highest of quality assurance standards and is ISO 9001. SleevSaver is also friendly to the environment and ISO 14001 certified as Eco Friendly. Our product is produced with green and medical grade materials.

  • Substrate Color: Clear / Translucent
  • Film Color: Clear / Transparent
  • Substrate Width: 30mm
  • Substrate Thickness: 3mm
  • Total Length: 1 meter
  • Adhesion Factor: >20N/24mm
  • Holding Duration: >24 hours
  • Temperature Resistance: 0° - 100° C / 32° - 212° F

SleevSaver works by sealing the area between your suspension sleeve and prosthetic socket when applied. Simply locate the intrusion on your suspension sleeve and apply SleevSaver to the socket in the proper area. You can also apply SleevSaver to the entire perimeter of your prosthetic socket for maximum protection.

TOTAL PROTECTION INSTRUCTIONS:
  • Carefully measure circumference of your prosthetic socket.
  • Clean your prosthetic socket in the area you wish to apply.
  • Cut SleevSaver to match prosthetic socket measurement.
  • Peel one side of the PET adhesive cover off and apply to socket.
  • As you apply, peel the remaining PET Film and use firm pressure.
  • Finish applying SleevSaver around your prosthetic socket rim.
  • Clean area of suspension sleeve, peel off the outward facing PET film.
  • Gently and carefully roll your suspension sleeve onto your socket.
  • Create vacuum using your current methods. Adjust as needed.